Vaporesso Switcher Product Review, Installation and Usage
Vaporesso Switcher Kit includes; Switcher Mod - 5ml GT8 coil 1 replacement GT4 coil replacement glass and seals attached to NRG Atomizer 1, user manual, quality USB cable, warranty certificate and warning certificate available. The quality of the box and the products is easily visible even at first boot, especially the USB cable is also very good quality.
With the inquiry card that comes with the user manuals, the product can be searched from the Vaporesso.com site.
The package does not contain any batteries as in other products, the choice of the battery is left to the user. The device is powered by 2 18650 type batteries and the minimum 25Amper battery is recommended. (Sony VTC6 recommended)
The Vaporesso Switcher comes with the GT4 Coil, which comes in the original package with the electronic cigarette, and the GT8 coil can also be used with lower watts, as the 0.14ohm GT4 coil has 2 turns. This can extend the charging time, while the GT8 can be used with 4-watts and higher watts, which is much better in terms of steam performance.
In this table, the VW mode of the device according to the watts are specified. If you use the GT8 coli High setting in the package, it is recommended to use between 40-80W, but if you use it in soft mode, it can be used between 60-110w. In general, normal mode is preferred, while soft mode is preferred for liquids with a higher PG content and higher nicotine content, while High mode is preferred for lower nicotine levels and higher Vg ratios.
High Mode: It is preferred for strong hit, if the watt value you use is 50W, when you press the ignition button, it starts as high as 10%, it comes to 50w after 1 second and it gives you faster and more abundant steam. In general, high VG low nicotine value is the choice of users.
Normal Mode: The most preferred mode selection gives constant watts.
Soft Mode: is the preference of those who like soft drink like the name, the watt value you use is 50W when you press the ignition button starts at a low value as 10% comes after 1 second and provides a comfortable drink in high ohms coils in high pg and nicotine ratio is the choice of users. Throat beat is better for high PG liquids.
Vaporesso Switcher Looks quite easy when using with ready-made coil. The wattage mode is sufficient and the wattage values for different uses are written on the coils.
Features
OMNI Board 2.6
Zinc alloy construction
Powered by two high-amp 18650 (sold separately)
Output mode: VW / TC-Ni / TC-Ti / TC-SS / TCR-M1 M2 / CCW (VW curve mode) / CCT (TC curve mode) / bypass
Drawing power: soft / normal / high
Wattage: 5 - 220 watts
Resistance range: 0.05-5 ohms
Temperature range: 100º C to 315º C / 200º F to 600º F
Smart VW mode
Replaceable outer case
0.96 ”-OLED display
Real-time clock (RTC) setting
Puff counter / Puff time
16 layer brightness adjustment
Shows charging time
Virtual display keys
Hinge and lock battery cover
Spring-loaded gold-plated 510 pin
2.5 amp micro USB balanced charger
The three materials (stainless steel, nickel and titanium) supported by the Vaporesso Switcher mode have SS, NI and TI representing the temperature control modes. Each of these icons will take you to a submenu where you can set the TCR for your material, set the power output, create your own custom temperature curve - set the temperature with power instead of degrees. In Temperature Control mode, Kanthal wires will not be used, the mode will automatically switch to watt mode. Many of the Clapton wires are ready-made coils and the Kanthal wire is available in Watt, CCW, modes with these wires.
A mode option that can be applied with Vaporesso Switcher is CCW mode. CCW mode is the watt mode that we set / customize the wattage value. For example, for the GT4 coil, we can apply the initial ignition watts of 40, then 50 40 50 40. The advantage is that we can adjust the output wattage according to our requirements, for example, if you want it to warm up quickly at the first press, you should keep the wattage slightly higher. Do not go higher than the watts indicated on the coil, I recommend the settings within the best wattage values.
Pressing the ignition key 5 times quickly turns the device on and comes in VW mode. 2 battery charge rates are shown separately. The supplied coil is 0.15ohm. Each coil may have a small ohm difference of 0.14 or 0.16.
The OLED display is quite clear and can be adjusted to brightness by entering the menu in a large comfortable way all values can be seen on the same screen.
You can adjust the watts as you see on the screen with the touch menu buttons and at the same time it is used as up and down buttons when you enter the menu.
Charging and updating can be done with micro usb port on the front side, it is convenient to charge from 1A output devices such as pc powerbank tv. For the safety of electronic cigarettes, the cell phone charger adapter is not recommended, because it is not clear how many amps the charger delivers. The recommended charging system is to charge the batteries with the external battery charger is much better than the external charger to use the device long life.
Vaporesso Switcher Liquid Filling
The NRG Atomizer that comes with Vaporesso Switcher is easy to refill. By sliding the cover, the liquid filling part is reached and the coil part is not visible from here. It is a very practical and beautiful system which prevented the liquid filling into the coil by mistake. The Drip Tip (mouthpiece) section is quite large, providing a comfortable shot and we can get plenty of steam, the package includes a converter adapter for 510 Driptip, which allows us to use different Driptip.
Note: Vaporesso has modified the drip type models and comes as 510 inputs, the 510 apparatus will not be included in the package.
The NRG Atomizer Structure that comes with the Vaporesso Switcher Kit is very stylish and convenient. Thanks to the lower wide air channel, steam enjoyment is quite nice. The parts are easy to remove, easy to clean and install. Thanks to the air duct at the bottom you can make the appropriate choice here I want to specify that there is a subject close to the air duct is used when you are using the soft mode I recommend you use the high mode coil in the coil can cause easy burning of the same hot wire cotton can apply to all electronic cigarettes. If you are using a fine-tipped drip type, I would suggest using a lower wattage if you use soft mode or normal mode.
Vaporesso Switcher Kit Installation Usage
The installation is very simple, we install and charge the batteries, and the batteries we buy generally come with a 5% charge, filling the atomizer with liquid and waiting for at least 15 minutes. For liquids with high VG, this period may be slightly longer.
Each new coil comes with a new coil warning on the screen. It is recommended to continue with the + key. When we insert a new coil, the device recognizes the new coil and registers the ohm value in the coil. If you continue with the - key on this screen, if the ohm value of your coil is different, ohm / watt values will be compared to the old coil.
The direction of insertion of the batteries is indicated by the + and - of the batteries in the battery compartments. The batteries are inserted in the opposite direction as shown. The left - side of the battery goes to the bottom of the mode and the right - side of the battery goes to the top of the mode.
Vaporesso Switcher electronic cigarette Charging and updating can be done with micro usb port on the front side, it is convenient to charge from 1A output devices like pc powerbank tv mobile phone charger adapter is not recommended for device security because it is not clear how many amps the charger gives. The recommended charging system is to charge the batteries with the external battery charger is much better than the external charger to use the device long life.
You can click the product link below to buy Vaporesso Switcher Kit at an affordable price.
