Vaporesso Revenger Mini Product Review Installation and Usage
Vaporesso Revenger Mini Kit includes; Vaporesso Revenger Mini Mod - Vaporesso NRG Se Tank (3.5ml) - Vaporesso GT4 0.15ohm Coil (included) - Vaporesso GT Ccell 0.5ohm Coil - USB Cable - User Manual - Replacement O-Ring Kit.
On / Off: Press the fire button 5 times in quick succession within 2 seconds to turn on the device. In the same way, the device will be switched off after 5 prints.
Vaping: Hold down the fire button and breathe through the mouthpiece. Release the fire button and exhale. Press and hold the ignition key to shoot Do not press the key when you do not shoot If the coil does not circulate air coil life decreases.
Display After switching on, the voltage, resistance, battery level, output voltage and so on. Images. If not used, the display will return to the Real Time Clock after 10 seconds, and if the Real Time Clock turns off after 15 minutes, it will not be used. Press the “+” or “-” or Mode button once and the display will illuminate with the real-time clock display and press the “+” or “-” or Mode button again, the main menu will illuminate. Press the fire button at any time, the screen will light up with the main menu.
Automatic atomizer recognition: The mode will read the coil resistance as soon as the connection is detected. When a kanthal coil is used, it will also recognize the coil type. Ready-made coils have kanthal wire structure.
Settings lock / unlock buttons: To lock the buttons, please press the fire button 3 times. In the same way, press the fire button 3 times li the locked buttons can be unlocked.
The three materials supported by the Vaporesso Revenger Mini are SS, NI and TI, which represent the temperature control modes of the three materials (stainless steel, nickel and titanium). Each of these icons will take you to a submenu where you can set the TCR for your material, set the power output, create your own custom temperature curve - set the temperature with power instead of degrees. In Temperature Control mode, Kanthal wires will not be used, the mode will automatically switch to watt mode. Many of the Clapton wires are ready-made coils and the Kanthal wire is available in Watt, CCW, modes with these wires.
In this table, the VW mode of the device according to the watts are specified. Initially 25w is recommended for the gt4 coil that comes with the Vaporesso Revenger Mini.
In general, normal mode is preferred, while soft mode is preferred for these liquids with a higher PG content and higher nicotine content, while High mode is preferred for liquids with lower nicotine levels and higher Pg content.
High Mode: It is preferred for strong hit, if the watt value you use is 50W, when you press the ignition button, it starts as high as 10%, it comes to 50w after 1 second and it gives you faster and more abundant steam. In general, high VG low nicotine value is the choice of users.
Normal Mode: The most preferred mode selection gives constant watts.
Soft Mode: is the preference of those who like soft drink like the name, the watt value you use is 50W when you press the ignition button starts at a low value as 10% comes after 1 second and provides a comfortable drink in high ohms coils in high pg and nicotine ratio is the choice of users. Throat beat is better for high PG liquids.
Smart VW mode: As an advanced Variable Watt mode, there are 3 VW levels: VW-High, VW-Normal and VW-Soft. The default setting is Normal. VW (High / Normal / Soft) will guarantee your module's ability to automatically select the average average wattage sufficient for the atomizer based on the resistance readings.
One mode that can be applied with Vaporesso revenger mini is CCW mode. CCW mode is the watt mode that we set / customize the wattage value. For example, for the GT4 coil, we can apply the initial ignition watts of 40, then 50 40 50 40. The advantage is that we can adjust the output wattage according to our requirements, for example, if you want it to warm up quickly at the first press, you should keep the wattage slightly higher. Do not go higher than the watts indicated on the coil, I recommend the settings within the best wattage values.
Automatic atomizer recognition: For better temperature control effect, the mode will ask the user if a new atomizer is installed. "OLD LOAD: -, NEW LOAD: +" will appear on the screen. If a new atomizer is installed, press the "+" key, the mode will read the new resistance; if not, press the "-" key, the mode will read at the locked resistor.
Vaporesso Revenger Mini Charger: As with other electronic cigarettes, it can be charged via mode with 1A output devices such as computer / powerbank.
Vaporesso Revenger Mini Kit has 10 second ignition protection, Short Circuit Protection, Low Voltage Protection, Overload Protection, Atomizer protection as many other devices as protection factors of electronic cigarette.
The NRG SE Tank that comes with the Vaporesso Revenger Mini Kit is very easy to use. 510 type Drip Tip Models are compatible.
Each time a new coil is used, liquid filling is done and it is recommended that you wait 15 minutes for the coil to moisten thoroughly.
The atomizer can be easily opened by turning the parts, it can be cleaned with a slightly damp cloth or napkin.
To buy Vaporesso Revenger Mini Kit Electronic cigarette at an affordable price, you can click the product link below.
