Vaporesso Polar Kit Product Review
Vaporesso Polar Package Contents: 1x Vaporesso Polar Mod - 1x Vaporesso Carscade Baby SE Tank - 1x Vaporesso NRG GT8 0.15ohm Coil - 1x Vaporesso NRG GT Mesh 0.18ohm Coil - 1x Replacement Glass - 1x USB Cable - Spare Seals - User Manual - Product Inquiry card.
The Vaporesso Polar 220W is a compact dual-battery mode category, measuring 90mm x 45mm x 28mm. In fact, this device is designed for a sleek look and ergonomics. Thanks to the rounded edges and corners, it is very comfortable at hand, so if ergonomics were an important criterion when choosing your next mode, the Polar can come along with the best on the market. Today, as in most other vape modes, Vaporesso Polar is made primarily of zinc alloy and comes in various colors. At the top of the Vaporeso Polar, we have a 510 connection centered with a spring-loaded, gold-plated pin, which can be used with all 510-connected atomizers. On the front, the Vaporesso Polar features a bright, gorgeous 2-inch color display, '+' and '-' buttons, and a selection button between them. Below these buttons is a micro USB port for built-in charging and firmware upgrades. On the back, we have a magnetic battery cover with a geometric pattern. Vaporesso Polar Battery Cover Despite being magnetic, the battery door is very robust, does not move at all and has little shaking at hand
In this table, the VW mode of the device according to the watts are specified. If you use the GT8 coil in the High setting, it is recommended to use between 40-80W, but if you use it in soft mode, it can be used between 60-110w. In general, normal mode is preferred, while soft mode is preferred for these liquids with a higher PG content and higher nicotine content, while High mode is preferred for liquids with lower nicotine levels and higher Pg content.
High Mode: It is preferred for strong hit, if the watt value you use is 50W, when you press the ignition button, it starts as high as 10%, it comes to 50w after 1 second and it gives you faster and more abundant steam. In general, high VG low nicotine value is the choice of users.
Normal Mode: The most preferred mode selection gives constant watts.
Soft Mode: is the preference of those who like soft drink like the name, the watt value you use is 50W when you press the ignition button starts at a low value as 10% comes after 1 second and provides a comfortable drink in high ohms coils in high pg and nicotine ratio is the choice of users. Throat beat is better for high PG liquids.
The attached 0.18ohm mesh coil can be used in the 50-90w range.
The magnets on the battery cover look quite strong. When you open the lid, you can see how tightly it closes. The direction of insertion of the batteries is indicated by the + and - of the batteries in the battery compartments. The batteries are inserted in the opposite direction as shown. The + portion of the battery on the left moves to the bottom of the mode, while the + portion of the battery on the right moves to the top of the mode.
Vaporesso To turn on / off Polar vape mode, you must press the fire button five times in succession. There are several things you can do to access the menu: you can press and hold the selection button - press and hold between '+' and '-' for one second or just press it three times. I don't know why there are two ways to access the menu, but there is.
The Cascade Baby Tank that comes with Vaporesso Polar has a liquid capacity of 6.5ml. This value will be more than enough for intraday use. Liquid filling is quite easy. To unlock the top cover, we lift and turn the halter slightly, open the liquid filling section, fill the liquid and close it again. In new coil usage, it is beneficial for coil life to wait at least 15 minutes after liquid filling and wait for the cotton to fully moisten.
Vaporesso Polar Kit has 10 seconds ignition protection, Short Circuit Protection, Low Voltage Protection, Overload Protection as protection factors.
Then we have one of the modes I've never seen before, SP. This stands for the Super Player and allows you to fire with a slightly too low 0.03Ω resistance. With the Vaporesso polar, you can use a low-ohm coil in super player mode, but it is not recommended that high current is drawn from the battery with low ohms, which may cause the battery to warm up. Do I need a low ohm? I think not enough with 0.12ohm comes with more than enough to see the need to switch to very low ohms in terms of both device and battery health very low ohms I think is not necessary. The dry head icon selected for the super event mode has also been selected as one of the more beautiful danger icons.
The Vaporesso Polar Mod has SS, NI and TI representing the temperature control modes of the three materials (stainless steel, nickel and titanium) supported for use. Each of these icons will take you to a submenu where you can set the TCR for your material, set the power output, create your own custom temperature curve - set the temperature with power instead of degrees. In Temperature Control mode, Kanthal wires will not be used, the mode will automatically switch to watt mode. Many of the Clapton wires are prefabricated coils and the Kanthal wire is available in Watt, CCW, SP modes.
One mode that can be applied with Vaporesso Polar Mode is CCW mode. CCW mode is the watt mode that we set / customize the wattage value. For example, for the GT8 coil, we can apply the initial ignition watts after 60 60 80 80 70 70 80. The advantage is that we can adjust the output wattage according to our requirements, for example, if you want it to warm up quickly at the first press, you should keep the wattage slightly higher. Do not go higher than the watts indicated on the coil, I recommend the settings within the best wattage values.
The screen color scheme can be changed in the menu section and there are colors like orange - green - blue - yellow.
Setting Buttons Locking / Unlocking: Pressing the “+” button simultaneously for two seconds will turn the unit on, then the up and down buttons will be locked and “SYSTEM LOCKED ekranda will appear on the display. Likewise, the “+” and mode button can be turned on and the screen is displayed.
Intelligent Coil recognition ON / OFF Setting: "When you turn on the smart function, it may vary depending on the intensity. Coil resistance levels within a safe limit in VW-H / N / S mode." How to operate: System Menu> SET> SMART ON / OFF Vaporesso Polar Smart When you install a new atomizer - coil with mode, it detects the ohm value and determines the appropriate wattage so you can have the easiest use.
To buy Vaporesso Polar Kit Electronic cigarette at affordable prices, click on the product link below.
