Vaporesso Luxe Review Installation and Use
Vaporesso's latest kit includes the Luxe Mod and the SKRR tank. The Luxe is an external dual 18650 mode that supports 220 watts and is powered by a reliable Omni 4.0 chip. With its latest design, Vaporesso SKRR Tank Atomizer is a sub ohm tank that is resistant to liquid spillage or liquid splash despite being sub-ducted.
Previous Vaporesso kits were highly praised for their design and performance. The last two flagships, Vaporesso Armor Pro and Vaporesso Polar, were considered two of the best models of 2018, and the tank series that came with the Vaporesso Cascade atomizer also received very positive reviews. Let's see if Luxe and the SKRR team can continue Vaporesso's previous successes.
I'll start by stating clearly: Luxe Mo is gorgeous. I can easily say that it is one of the best looking Mods I use. I was also fortunate to have received the entire black print, my personal favorite. It comes with a central 510 connection that allows the 28 mm atomizer to be installed without overflow from the mode. Its shape, size, and rounded edges make it a pleasure to hold, although slightly lighter than the Voopoo DRAG, even though it is heavier than previous Vaporesso dual battery revenger modes.
The plastic front and back covers make Luxe a fingerprint magnet, but that's something to be expected. The screen is quite large (2 inches) and the font is clear and smooth in size. I wish the screen would be a little brighter - even at the highest brightness, I didn't have much trouble reading the screen when I was outdoors. There is also a very small movement on the rear panel, but it does not shake and does not move unless you force it.
Vaporesso Luxe Mod Features and Specifications
Powered by OMNI Board 4.0
Dimensions: 47.8x 29.5x 86mm
510 Atomizer Connection
Output Power: 5.0 - 220W
Temperature Control: Nickel 200 / Titanium / Stainless Steel / TCR / VV, Bypass, CCV, CCW Modes Available
Temperature Control Range: 100 - 315C / 200 - 600F
Resistance range: 0.03 - 5.0ohm
Bypass mode
Insta-Fire: 0.001s Ignition Rate
2.0 "TFT Color Screen
Magnetic Battery Cover
* We recommend using an external charger for optimal charging *
Micro USB Charging Port - 2.5A (1A recommended for Security)
Short circuit protection
Load Protection
Ignition Protection
Low Resistance Protection
Low Power Protection
Overcharge Protection
ESD Circuit Protection
Vaporesso SKRR Tank Features and Specifications:
Dimensions: 30 x 59.85mm
Diameter: 30mm
510 Atomizer Connection
E-Liquid Capacity: 8.0ml
Retractable Top Filling Design
Bubble Glass Tank
Bottom Adjustable Air Flow Control Valve
Quadflow (QF) Air Distribution System
Cotton Linen Fiber
Compatible with Vaporesso GT Coiller for Watts
Compatible with 528 Type Dripts
Vaporesso Luxe Screen information
Dual battery monitoring - Clock
Selected mode
Wat amount
Coil Resistance - Voltage
Puff counter - Lock warning - Puff time
Vaporesso Luxe Menu Transitions And Usage Details
Ignition Key On or off with five clicks
Three clicks to unlock
Touch the logo three times to enter the menu
Left and right touch to navigate the menu
Touch the logo to enter the submenu
Tap left and right to navigate through the submenu
Touch the logo to exit the submenu
Select “Exit gitmek to go to the main screen
Press the ignition key 3 times to lock
Vaporesso Luxe Kit Drip Type for Liquid Filling of SKRR Atomizer Extracted, liquid filling chamber is opened. It is recommended to fill liquid in each new coil and wait at least 15 minutes. When the new coil is installed, start at lower than the watts on the coil to prevent the coil from burning. For example, you just bought the device or changed the coil with the smart mode the device can set 70w coil 50-80w on the 50-50w start with the start.
SELECT Watt Mode 1) VW-H / VW-N / VW-S (Variable Watt mode - high / normal / soft): will automatically select the appropriate average wattage for your atomiser. If you switch between different ohm resistors.
2) SP (Super Player mode): In this mode, it will support a wider resistance range from 0.03Ω to 5Ω adapted to mainstream RDA tanks.
3) VT-SS / VT-NI / VT-TI: Variable temperature control mode for Stainless Steel / Nickel / Titanium material. (Watt mode recommended for ready coils)
4) VV (Variable Voltage mode): You can manually adjust the voltage to match the resistors of the coil you are using, the high resistance of the coil you are using, and the corresponding high voltage.
5) CCW (Custom Curve of Watt mode): To use the up and down buttons to customize your own watt output line curve, quickly move to the next bar by pressing the fire button, press the mode button to save and exit.
6) BP (Bypass mode): Direct output voltage mode depends on the battery level, the output voltage rises as the battery level rises, supported coil resistance range: 0.05-5ohm. (Bypass mode not recommended for new users)
7) CCV (Special Voltage mode in DIY MENU): you can use the up and down buttons to customize the curve of the voltage output line, quickly press the fire button to move to the next bar, press the mode button. save and exit when setting.
8) TCR-M1 / M2 (Temperature Coefficient of Resistance mode in DIY MENU) Note: In VT and TCR mode, Celsius and Fahrenheit can be changed by setting the maximum value on the home page.
9) SMART ON / OFF (in SET MENU): This is an advanced Variable Watt mode, when this function is enabled, in VW-H / N / S mode it can change the intensity according to coil resistance levels within a safe limit. (This is the recommended mode of operation. The coil wattage is automatically adjusted. It is recommended to start with 20w lower than the wattage set on each new coil.)
10) AUTO ON / OFF (in the SET MENU): Auto function that has difficulty switching between VW-H and VW-N or between VT-H and VT-N.
SECURITY PRECAUTIONS:
1) Do not use the device in a rainy or dusty environment. 2) Connect the USB port and charger correctly. Unplug the charger after charging is complete. 3) In case of scratches or damage, do not mix this device with coins, jewelry or other hard objects in the bag. 4) Chargers and batteries may be heated during charging and should be kept away from flammable gases and liquids. 5) Please keep the device away from extreme temperature conditions. 6) Do not attempt to disassemble the screen. 7) Please do not drop, throw or abuse your device. 8) Please turn off the device when not in use.
CAUTION ABOUT BATTERY USE:
1) Always use this device with a battery charge. 2) If you use external equipment to charge the battery, please use the correct and qualified charging equipment 3) Please select standard batteries from reputable companies. Do not use batteries with a torn body. 4) Please use a dry cloth to clean the battery and terminals as needed. 5) Do not leave charging batteries unattended. 6) Do not expose the battery to extreme heat, cold or direct sunlight. 7) Keep the battery away from water or any liquid.
