This table shows the watts in VW mode. For the GT Mesh coil that comes with the Vaporesso Armor Pro Kit attached, the 30w is recommended for the first start. Unlike other coils, Vaporesso GT CCELL2 is a ceramic coil that has a lower aroma than the steam needed to taste better.
In general, normal mode is preferred, while soft mode is preferred for these liquids with a higher PG content and higher nicotine content, while High mode is preferred for liquids with lower nicotine levels and higher Pg content.
High Mode: It is preferred for strong hit, if the watt value you use is 50W, when you press the ignition button, it starts as high as 10%, it comes to 50w after 1 second and it gives you faster and more abundant steam. In general, high VG low nicotine value is the choice of users.
Normal Mode: The most preferred mode selection gives constant watts.
Soft Mode: is the preference of those who like soft drink like the name, the watt value you use is 50W when you press the ignition button starts at a low value as 10% comes after 1 second and provides a comfortable drink in high ohms coils in high pg and nicotine ratio is the choice of users. Throat beat is better for high PG liquids.
With the Cascade Baby tank that comes with the Vaporesso Armor Pro Kit, it is very small in size. It is close to the size of a pen-like cigarette, for example, Smok Stick Prince - Eleaf i Just S, or thinner than a single battery electronic cigarette, for example Smok Alien Baby Al85 (new name RHA 85 Kit) - Vaporesso Swag.
Vaporesso Armor Pro 100W Mod Features:
Powered by OMNI Board 4.0
Watt Output: 5.0 - 100.0w
Variable Temperature Control: Nickel 200 / Titanium / Stainless Steel / TCR
Smart VW, Bypass, CCW, CCT Modes Available
Temperature Control Range: 100 - 315C / 200 - 600F
Resistance range: 0.03 - 5.0ohm
Insta-Fire: 0.002s Firing Rate
0.96 "Color OLED Display with Integrated Fire Button
Requires (1) 18650, 20700 or 21700 High Amp Battery (Sold Separately)
Includes 18650 Battery Adapter Case (Pre-installed)
Micro USB Charging Port
Please note: Temperature control requires the use of nickel, titanium or stainless coils.
Micro USB Charging Port
In-Mold Labeling (IML) Injection Coating and Aluminum Alloy Chassis
Gold Plated 510 Atomizer Connection with Spring
Multiple Protection Systems:
There are many protection factors such as 8 Second Ignition Protection, Over Charge Protection, Atomizer Protection, Low Coil Protection, Short Circuit Protection, Low Battery Protection.
Liquid filling is easy with Cascade Baby Atomizer, which comes with the Vaporesso Armor Pro Kit. The liquid can be filled by simply lifting the upper lid part which is locked and turning it to open.
In the Cascade Baby atomizer used with Vaporesso Armor Pro Kit, the underside of the atomizer is opened and coil changes are made in a way that we are not used to in many ready-made coils. The nice advantage of the coil change from the bottom of the atomizer is that there is no need for liquid discharge. Since the liquid remains on the top of the atomizer, the coil can be replaced even if it is liquid in the atomizer.
Installation and Use:
Installation is very simple, it is enough to fill liquid and wait at least 15 minutes. The device will be switched on by pressing the ignition button 5 times in series. The incoming battery has a 5% charge as it is recommended to charge via computer or powerbank. You can use the device in VW watt mode, with VW mode it is better to start with low watts for each new coil use in terms of coil life. Each coil has watts on the top of the values frequently used coil reduces the life. Hold down the fire button and breathe through the mouthpiece. Release the fire button and exhale. Puff is as simple as ...
You can click the product link below to buy Vaporesso Armor Pro Kit Electronic cigarette at affordable price.
